• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
Garage Heroes (In Training)

Garage Heroes (In Training)

Learning as we go. Come along with us and Enjoy the Ride!

  • About Us
  • Our Cars
  • Our Drivers
  • Handy Links
  • Tips/Tricks
  • Contact Us
  • Questions or Comments
  • Sponsorship

Race Car Prep

GHIT 0157: John and Dean from Safety Third Motorsports Discuss Race Car Preparation

John Lavin and Dean Hesser join us to discuss improvements to our car preparation processes.  This includes before leaving for the racetrack, as well as at the racetrack and after the race.  We learned a ton of things that we should have been doing but weren’t simply because we didn’t know or hadn’t thought of it yet.  We hope that this episode will save you at least one headache at the track or eliminate one breakdown or even better prevent an issue on track that causes damage to you or your car.  We don’t have a lot of can’t miss episodes, but this is one of them for sure.

In addition, Dominating with Dawson we discuss some of the goal options for endurance racing.  It is not simply a situation where you are either first or last, but really it is a race where you and your team are trying to work together and perform at the highest level internally and the final position is a relative measure of the team’s performance versus the current bar that weekend.  While winning overall, or even your class, is a great accomplishment, it is not the only measurement available each weekend, especially early in your racing career.

We hope you enjoy this episode!

Best regards,

Vicki, Jennifer, Alan, and Bill

Hosts of the Garage Heroes In Training Podcast and Garage Heroes In Training racing team drivers

Highlights from this episode include:

1)  Bill makes up a new word, “ThankYouNess”, well you know what we mean.

2)  How Dean has “capitalized” on being target fixated during a race.  Your results may vary.

3)  Then we go into a “Weekend At Bernie’s” worthy moment.  For those under 40, it’s a movie.

4)  A brief summary of why many of the Safety Third Motorsports team members have ended up using BMW’s as their weapon of choice on track.

5)  Bill cannot help but to make fun of the test drive at John’s shop where the GHIT M3 HPDE hit a deer.  Sometimes you can’t make this stuff up.

6)  A discussion of their team’s racing plans for 2021 and how both teams generally decide where to race.

7)  How their team has progressed and grown over the years.  It appears that our team is actually following their progression, both in how our team is organized and how our drivers are individually progressing.  Perhaps there is hope for us.  Who knew?  Lol.

8)  How Dean and Jen both ended up learning and growing as racing drivers as a result of their track incidents.

9)  What is prepping a car?  What is involved?  What do you do before the race, during/at the race, and after the race to prepare and preserve your car and make sure that it has a higher likelihood of performing well.

10)  Basic assumption:  Assume everything is broken after a race and then verify before you take it to your next event.

11)  Develop a wear rate of consumables and moving parts and then develop a preventative maintenance plan to replace before they fail at the track.

12)  Overview:  Repair things as they break or replace them ahead of time at a certain interval.  Determine your team’s philosophy and plan appropriately. 

13)  A standard rule of thumb is to use a margin for wear, it can range from 75% to 80% to 90% of the experienced failure rate before replacing a still good part.  This does not address issues due to abuse or an accident etc.  As an example, if your front wheel bearing fails after 100 hours or racing, you may want to replace them all before they break at 75 or 80 or 90 hours.  The balance of costs and/or effort vs your acceptable safety/failure factor is a personal/team decision.

14)  Several available options range from paint marking nuts and bolts to adding safety wires.

15)  What should you do when at the track and prepping for the race in the morning.

16)  What to do the night after are race while racing the next day.

17)  What to do post-race weekend while packing up to leave the track.

18)  Why checklists are so very important and how your team will need to develop it from your own experiences and particular car.

19)  It was good to hear that we aren’t the only team to have had radio communication issues at the track.  They have come to the same solution as we have.  Painfully.

20)  The key is really to minimize the number and potential for errors.

21)  We finish up this segment with the post-race recovery process for your race car.  Don’t just put it away to wait for the next track event.

22)  We wrap up with a post episode discussion of the skid pad and the value that it has had to our driving, as well as Dean’s.

GHIT 0157: John and Dean from Safety Third Motorsports Discuss Race Car Preparation

GHIT 0098: Ben Liaw from Rogue Engineering on racing BMW’s

Rogue Engineering
Rogue Engineering at the track

Ben Liaw from Rogue Engineering was kind enough to come on this week’s podcast.  Ben races and also supports his racing clients at Rogue Engineering in Upper Saddle River, NJ, where they not only assist with race car prep and on track support but design and manufacture many parts improvements for many BMW models.

Also, on this week’s Dominating with Dawson, we went over driving a new to you race car and what you should do prior to driving and how best to acclimate to the new vehicle.

Highlights from this week’s episode include:

1)  Stories of how his business grew from designing and manufacturing to mechanical and racing assistance
2)  Some thoughts on car prep for racing
3)  A great discussion of various BMW models that are used in racing, including strengths and areas where you may want to augment the stock parts and systems.  Most 3 series models were discussed including the E30, E36, E46, E92 as well as the more modern F series models, as well as a few 1 and 2 series models and Mini’s, including relative strengths and weaknesses between them.
4)  Our first real discussion about the AER endurance racing series
5)  Potential upgrades for racing our M240i
6)  Spec E46 race cars and priority the addition of upgrades, including the subframe issue
7)  Bill gets into a discussion while Vicki has computer issues
8)  Alan picks Ben’s brain throughout while he also goes shopping while we are recording “for Vicki” lol
9)  Bill put Ben in an unfair spot to compare BMW’s to other typical cars, like Boxsters/Caymans and Miata/MX-5’s etc.  Ben, you have our apologies.
10)  Vicki wanted to appeal to Ben for any assistance with her latest E36 rear wheel hub and bearing replacement project/debacle.  Ben offered his typical preventive maintenance program for hubs and bearings for his AER endurance racing.
11)  We even go into critical spares and critical spare philosophy and the potential tradeoff vs pre-race prep
12)  Several Dante references and a new level called “Wheel Bearing Hell”. Vicki views this as the hidden 8th level.
13)  Rogue Engineering’s incredibly smart wheel studs with a hex end on both ends in case of a sheared stud
14)  Bill finds a brand of power tools where he is fully qualified, and even Alan agrees

To contact Ben and his team or follow along with their various exploits, you can go to their website at https://www.rogueengineering.com/ or follow them on Instagram at Rogue Engineering.

Thank you for listening to our podcast.  Please subscribe to our podcast your favorite podcast source.  If you have any questions or topics you would like for us to cover, please feel free to let us know at:

www.GarageHeroesInTraining.com
or via email at:  [email protected]

and you can follow us on Instagram at Garage Heroes In Training
or on Facebook at GarageHeroesIT or Join our Friends of GHiT group.

And if you really would like to help us out, please leave a rating and review on your Podcast App of choice, Apples Podcast app, iHeart Radio, Stitcher, or whatever podcast app you use and we will address any questions that you leave on the review.

We hope to see you out there racing with us.

Bill, Vicki, Jennifer, and Alan

Hosts of the Garage Heroes In Training podcast and team members in the GHiT Immature Endurance Racing Team

Rogue Engineering
The Key Is In The Preparation

GHIT 0098: Ben Liaw from Rogue Engineering on racing BMW’s

Primary Sidebar

Most Recent

  • DwD 0507:  Racing the Track vs Racing the Other Cars
  • GHiT 0506:  Eric Dewey DeWitt
  • The Mythology of Late Apex and Braking in a Straight Line
  • Glenn Robinson
  • The Fail Failage Rally 2023

Categories

  • Aerodynamics
  • Autocross
  • B Spec
  • Cars, Mostly ours
  • Comic Books and Movies
  • Dialing In
  • Dominating with Dawson
  • Driver Education
  • Fitness
  • Food
  • GLTC
  • Grid Life
  • Guests & Interviews
  • Honda Challenge
  • HPDE
  • Judges
  • Lemons Rally
  • Mechanical
  • Motorcycles
  • Our Team
  • Races
  • Racing 101
  • Radios and Communication
  • Safety
  • SCCA
  • SIM racing
  • Sundae Cup
  • Telemetry
  • Themes
  • Time attack
  • Track Photography
  • WoOT

  • About Our Team